Climate change and energy use

As a large industry player, Norske Skog recognises its responsibility to reduce greenhouse gas emissions. In 2007, we established our goal of achieving 25% lower greenhouse gas emissions within 2020, compared with emissions in 2006. As of 2015, our emissions were 26% lower than in 2006.

Norske Skog has integrated reduction of greenhouse gas emissions as a key part of our business strategy. The goal is to reduce energy consumption, change the sources of energy and to optimise the use of process chemicals and transport.

Based on the CEPI carbon footprint tool, our carbon footprint covers emissions from the following elements of our value chain:

• Pulp and paper production

• Forest and recycling operations

• Producing other raw materials and fuels

• Purchased electricity and heat

• Transport- excluding transport to final customer which is calculated on a case by case basis

• Carbon stored in forest products (biogenic carbon) is reported separately.


The average global carbon footprint per tonne of paper produced by the Norske Skog mills in 2016 was 672 kg CO2 equivalents/tonne of paper. This represents a decrease of 4.1% compared to 2015. 1 432 kg/tonne biogenic CO2 is estimated to be contained in the product.

The carbon footprint varies considerably between the mills and regions, depending on the source of electricity and the type of fuel used to produce process heat. The emissions per tonne of paper production ranged between 282 kg CO2-equivalents/tonne of paper in Europe to 1 743 kg CO2- equivalents/tonne in Australasia.

Norske Skog has comprehensive programmes in place to continuously reduce energy consumption and to make it more environmentally friendly. We are already a large producer of bio-energy.

The production of paper is an energy intensive process. Energy is consumed mainly for two purposes:

• To separate, process and transport fibre and water (electrical energy)

• To provide process heat and to dry the paper (thermal energy)

The major use of electrical energy in mills which process fresh fibre is the process which mechanically converts wood chips into fibres. This process is called the thermomechanical pulping (TMP) process. Paper production based on recovered paper consumes less energy because the fibres from recovered paper are more easily separated than those within wood. The group’s average energy consumption per tonne of paper produced in 2016 was a little higher than in 2015. Four mills had lower or similar energy consumption per tonne of paper in 2016 compared to 2015.



Business Units


Norske Skogindustrier ASA
PB 294 Skøyen
0213 Oslo

Phone: +47 22 51 20 20
Main fax: +47 22 51 20 21
See more contact information


Norske Skogindustrier ASA
Karenslyst allé 49
0278 Oslo

Norske Skogindustrier ASA, PB 294 Skøyen, 0213 Oslo, Norway

Phone: +47 22 51 20 20 - Main fax: +47 22 51 20 21